Relé de Carregamento Automático c/ Timer ATD Blue Sea 7615

Can be configured to be used as one of the following battery saving products

Timer Disconnect

12V signal triggers relay to connect battery power to devices

When signal is removed the timer is activated and will disconnect devices after a preset time

Timer ranges from 15 minutes to 4 hours

Low Voltage Disconnect

12V signal triggers relay to connect battery power to devices.

After 12V signal is removed, device senses low battery voltage and automatically disconnects devices.

Low voltage setting can be used in conjunction with Timer Disconnect. Low voltage will disconnect devices prior to preset time to preserve battery power

Automatic Charging Relay

Automatically combines two batteries when charging, and isolates them when discharging

Single side sensing design only monitors the voltage of the start battery

Ideal for auxiliary batteries that are AGM or significantly larger than the start battery

Solenoid

12V signal will connect or disconnect relay without any time delay

Specifications

Nominal Voltage 12V DC

Amperage Operating Current 175mA (closed)

4mA (open)

Terminal Stud Torque 140 in-lb (15.82 Nm)

Continuous Rating 120A

Intermittent Rating 210A (5 Min)

Cable Size to Meet Ratings 1 AWG (50mm2)

Charge Sense Connect 13.0V (3 sec)

Charge Sense Disconnect 12.75V (10 sec)

Disconnect Time 5 sec, 15 min, 30 min, 1 hr, 1.5 hr, 2hr, or 4hr

Input Voltage Range 9.5-16V

Low Voltage Disconnect 11.0V (10 sec)

11.5V (10 sec)

12.0V (10 sec)

Maximum Cable Size 1/0 AWG (50mm2)

Stud Material Tinned Copper

Terminal Ring Diameter Clearance 1.12in (28.45 mm)

Terminal Stud Size 3/8"-16 (M10)

Over Voltage Lockout 16.0V (5 sec)

Weight 1.25lb (0.57 kg)